Thursday 17 October 2013

Delay Causes in Sub-Projects of the Ho Chi Minh National Highway Construction Project

Vietnam has been remarkably successful in expanding infrastructure construction project.
During the execution of Highway construction project, the construction time, cost and quality of a project were commonly considered as key factors of project success. The project time can be evaluated as the very important factor in the project management work because it affects directly on the profit and investment effect of project. The project investment effect will be reduced significantly if project time delay happens.

The procedures of the project management in general and the time management in particular in Highway construction project has been improved to apply in Vietnam for recent years as at that point Vietnam carried out the open-door policy to attract FDI (Foreign direct investment) projects. However, many problems have been revealed due to the deficiency of the proficiencies in project management, such as: project delays take place usually in the development projects due to Poor planning and controlling; poor Finance Competence of the contractors; unfair contract conditions included unfair and non strictness treatment of contract delay; poor competence of supervision consultant; deficient transmission among other parties, weather condition, resettlement policy or other factors. It is found out that more than 70% of the Ho Chi Minh highway construction sub-projects have the problems with project time delays.

Normally, the success of a project is measured if it was completed punctually, with reasonable cost and quality. It is proved that the completion of every construction project will be on time and under budget only if it has been managed efficiently and effectively. Particularly, several previous researchers demonstrated that at least a half of project delay causations can be avoided by a proficient policy in project management.  Nguyen Dinh Duong made a case study which main objectives were to:

1. identify the delay causes in the Ho Chi Minh highway construction sub-projects which were completed up to now or under construction.

2. To develop a framework to control and prevent delays in the remaining or under construction sub-projects of the Ho Chi Minh highway construction project.

Conclusion

Time delays in construction projects are a global phenomenon. The time delays commonly occurred in most of construction projects and the highway construction projects are not exception.

A case study (the studying sub-project) has been conducted to investigate the delaying factors, causes and solutions for controlling and preventing the delay of the Ho Chi Minh highway construction sub-project. The analyzed results of this study pointed out that there are nine delaying factors and numerous delaying causes in the studying sub-project.

A framework with solutions is proposed for controlling and preventing the delay of the studying sub-project. The result implemented on the studied sub-project proved that the solutions proposed for controlling and preventing the time delay during the construction are implemented successfully.  Effect of applying the solutions to control and prevent delays during the construction of the studying sub-project resulting in the rate of the work progress of the studied sub-project has been improved quickly and at the end, completion period of the studied sub-project has been maintained between 15 months as the original plan.

Effect of controlling and preventing the project delay will come more effectively if solutions proposed are applied since the project preparation, detailed design and contractor selection phases etc.

Recommendation

The HCM NH construction project is a great and very important highway construction project in Vietnam. HCM NH project is around 2667 kilometers long including two phases. The first phase was started in 2000 and planned to complete in 2010 with cost estimated of around 2.3 billions USD. Up to now, 57 sub-projects of the first phase HCM NH construction project have been completed or being implemented. A larger number of this sub - projects (about 70%) have encountered with time delay. In accordance with the approved plan, the second phase of the HCM NH construction project was implemented since 2010 to 2020 with cost estimated of around 15 billion USD and divided in a lot of sub-projects.

Based on the actual delaying situation of the first phase sub-projects and result of successful implementation on the studying sub-project, this report recommends strongly application to control and prevent delays in the remaining HCM NH construction sub-projects.

Abstract

In general, project completed with destined time, cost, and quality is the basic target of construction project management. The Ho Chi Minh National highway (HCM NH) construction project is a great and very important highway construction project in Viet Nam. HCM NH project is around 2667 kilometers long, does not include the West branch with the length of 500 kilometers from Khe Gat – Quang Binh province to Thach My – Quang Nam province. Cost estimated of the first phase is around 2.3 billions USD by Vietnamese Government for the two carriageway lanes standard. The first phase was started in 2000 and planned to complete in 2010. After that, from 2010 to 2020, the HCM NH will be improved step by step to standard of the high-speedway with the cost estimated of this phase is about 15 billions USD. For the purpose of performance arrangement, this project is divided into the HCM NH construction sub-projects. Regrettably, up to now, most the HCM NH construction sub-projects cannot be finished within intended time, budget and resources.

Normally, time delay always happened in Ho Chi Minh NH construction sub-projects. This report summarized the delay causes factors involved in the Ho Chi Minh NH construction sub-projects. This report will be conducted by using qualitative early researches. Through a case study on the road construction sub-project connecting the HCM NH to the Lan Ong commemorative area, the data will be collected to analyze the facing problems. It was discovered from this study that there were many factors causing project time delays in the studying sub-project. From the case study, effective solutions for controlling the delays will be investigated. Finally, a framework for controlling and preventing delays in Ho Chi Minh NH construction sub-projects in the future is proposed.


Wednesday 16 October 2013

Communication Management within a Construction Project Team

The construction industry in Vietnam, especially commercial building sector, is now suffering from many problems regarding communication management. Some common problems are:
1. Usually skipping communication management or just approaching it shallowly due to lack on this knowledge area.

2. Problems related to interpersonal communication (such as face-to-face meetings), intra-group communication (such as interactions between team members) or inter-group communication (such as interactions between main contractors and sub-contractors) occur very frequently at many projects. Consequently, projects communication often breaks down and projects are likely to be failed. 

3. Unable to determine project stakeholders’ needs for information, unable to determine communication channels in projects, insufficient interaction between project management and team members or between main contractor and sub-contractors or within team members, inappropriate communication media, etc.

4. Timing of distributing information, correct information to correct stake holders, wasting a large amount of time and resources for unnecessary meetings, etc.

5. Unable to combine verbal communication and non-verbal communication in order to achieve targets.

6.Abusive use of bad emotional methods during interaction between project management and team members such as fear and threats, aversive stimulation, etc.

Therefore, it is important to understand the nature of problems and to find ways to solve them in order to be able to develop an effective communication management system in construction projects. Nguyen Canh Toan made a case study which objectives were to:

1. investigate the communication interactions within construction project team so that communication problems causing project interruption can be identified.

2. propose recommendations how to improve communication management within construction project team.



However, there are some limitations in this study. Firstly, relationships between communication problems and types of information in action have not been graded in order to figure out which one is the biggest factor that causes communication interruption; or the applicability of the proposed solutions for those problems.



1. Project Manager shall prepare project management plan including communication plan in the beginning of the project.

2. Strictly following the communication plan. Incentives shall be provided to encourage everybody to carry out it properly, and also treatments or even punishments for bad behaviours.

3. Document controller position must be stable as much as possible in order to ensure that the information distribution process is in order.

4. In case of ISO certified company, Project Manager should give feedback to the company Quality Manager to add in personality test forms together with Job Application Assessment Procedures forms. That will save Project Manager’s time whenever there is new job applicant coming to job site for interviewing.

5. Using new information-conveying methods such as: web-based data distribution, e-meeting, etc. in order for easy document control and timing of document distribution.

6. Organizing trainings for the team members in order for them to know how to use both verbal and non-verbal communication effectively.

7. Outside activities such as playing football, parties, etc. are recommended to improve relationships among team members and between the main contractor and subcontractors.



Communication management is one of the nine knowledge areas that can be found in the Project Management Institute’s A guide to the Project Management Body of Knowledge. This is a really tough challenge and time-consuming task to any project manager. Despite the fact that ineffective communication management will result in project interruption or even failure, there are not many project managers or site managers in Vietnamese contractors being aware of its importance. This final project report focuses on construction project communication management between the main contractor and subcontractors as inter-group communication and within the main contractor team members as intra-group communication. By reviewing many researches and studies of many authors on this field, knowledge as regards communication management within team and with external party such as will be explored step by step. Through a case study of condominium project in Ho Chi Minh City, communication problems which cause project interruption will be investigated and analyzed. Some proposed solutions which are based on the reviewed knowledge will be discussed in order to help project managers improve communication in the project.

Tuesday 15 October 2013

Marine Facility Design and Its Impact on Project Cost in Refinery Projects: A Case Study Of Nghi Son Refinery and the Petrochemical Complex Project

Most construction projects begin with recognition of a need for a new facility. Long before designers start preparing drawings and certainly well before field construction can commence, considerable thought must go into broad-scale planning. Elements of this phase include conceptual analyses, technical and economic feasibility studies, and environmental impact report.

For example, location is fundamental to planning for a new industrial plant. Where the plant can be located to provide desirable, nearby employment for an adequate supply of skilled and productivities workers? What are the present and projected costs and customs associated with the labor force? Depending on the natural of its raw materials input and its products, will the plant have access to the most appropriate and economical forms of transportation, be they air, water, highway, rail or pipeline? Does the local provide access to raw material and to market? Are there adequate sources of energy, including gas, oil, and electricity; and are there convenient communication facilities? What political or institutional factors may ease or impede development and operation of facility? What will be the sociological and economic impact of this plant on the community? What will be environmental impact? What do all these factors taken as a whole, mean for the technical and economic feasibility of the project? Perform the feasibly study to ensure the effectively of the project.

The problem involved in getting a project started probably:
  • Design concerned by possibility that owners spend a lot of time and money
  • Uncertain as to what the Scope of the project should be
  • Worried about how much it is going to cost

Especially, refinery project have a lot of items to study and design including marine facilities, which affect to cost. Le Tu Anh made a research to study how design and selection of an optimal location for marine facility of refinery project affects to project cost.

Conclusions

The Nghi Son refinery and petrochemical complex project has been studied for long time. In this research, the following were proposed:

Firstly, the research was performed and then economic analysis was established. The data was used for analysis based on the Primary design of marine facilities.

Second, the projects begin with recognition of a need for a new facility. Long before designers start preparing drawings and certainly well before field construction can commence, considerable thought must go into broad-scale planning. Elements of this phase include conceptual analyses, technical and economic feasibility studies. All the factors taken as a whole, mean for the technical and economic feasibility of the project. The costs of the marine facilities are estimated. The research shown the optimal design and how impact to the project cost. The owner determines time, money and scope of the items.

Finally, an analysis on the result of the plan showed that the project was well planned, project bring high advantage to owner.

Recommendations for further study

Since the amount of investment for Nghi Son Project has been the biggest in history, here in Vietnam, the financing arrangement for the project is challenging. In order to deal with the complexities of the project in reality, it is recommended that the research conducted in this thesis should be extended to take into consideration the following issue: It is necessary that the Government to grant special incentives and support to improve the viability to enhance Equity IRR of the Project. Based on this concept, the investors would like to propose following incentives and Government supports, most of which have been accepted by the Government. - Initial dredging for product jetty, crude oil jetty (SPM), including harbor (water basin) and channels.

The Dredging volume is big so the Vietnamese contractor cannot be sufficient capacity during a short time. Then Government should give special international contractor who have competence implement the dredging item in the project.

Annual dredging cost of entrance channel will be shared with the Government because the channel is used both Export product jetties of NSP and berth No1 &2 of Local Authority.

Abstract

The refining industry is one of the key industries playing a very important role in the development of the national economy. In addition to ensuring the national energy security, i.e. the supply of strategic energies such as LPG, gasoline, kerosene, jet fuel, diesel, etc, the establishment and development of this industry with the building of refineries will pave the way for the other related industries such as petrochemical industry, basic chemicals production, petroleum products transportation, storage, trading and distribution.

Additionally, the existing of the refineries will definitely bring about positive benefits in the socio-economic fields as well as the national security and defense, making contributions to speeding up the process of industrialization and modernization as proposed by the Government of Vietnam.


Therefore, this thesis deals with how design and selection of a optimal location for marine facility of refinery project to reduce project cost.

Wednesday 9 October 2013

Engineering, Procurement and Construction (EPC) Contracts Performance in Oil and Gas Industry

Today, oil and gas companies prefer to sign the EPC contracts than other forms of contracts so that they can avoid and reduce any conflicts in execution of contracts due to interfaces and risks between project companies and contractors and easy to control the projects in every aspects.

EPC contracts are often used in medium and large scale oil and gas projects in Vietnam since 1990s. According to international practices, in case of any disputes or problems happened in the execution of EPC contracts, those problems and disputes shall be referred to clauses of EPC contracts and settled by arbitration in accordance with the signed contractual clauses and conditions. In Vietnam, some projects are usually built to meet the socio-economic issues and often guided by the Government. So it is a bit difference between the Vietnamese and international practice. Hoang Huu Cam made a study which aimed to focus on the following issues with regard to GDC Project’s EPC contract:

1. Delay in commissioning activity.
2. Consequences of the delay.
-    Extension of Time for Completion to EPC Contractor
-    Compensation for EPC Contractor
-    Compensation for Certifying Agent
-    Compensation for BP

General Conclusion

1. The successful factors of the Project
There were two factors resulted in success of the GDC project. The most important factor was tendering process and selecting the right EPC Contractor for the right works. The EPC Contractor, DWE, has much experience in engineering, procurement and construction. Besides, the Sub-contractor, Petrovietnam Engineering & Construction Company (PVECC) is one of the leading contractors in oil and gas industry of Vietnam.

Another factor was that the project management was very good during construction period. The EPC Contractor applied the latest project management knowledge for the project at that time and the Project Company was very satisfactory to this matter. Through this project, with the purpose of “on-job-training” both Subcontractor’s and the Project Company personnel obtained much experience and project management knowledge from EPC Contractor.

2. Adversely Impacted Factors on GDC Project
The first thing PVGC faced with was that it had less authority to control the relationships between the project’s stakeholders as well as responsibilities between them. This happened because a substantial part was mechanism in economic and business activities in Vietnam. Over 20 years of “Doi Moi” process, Vietnam has pursued a Socialist Oriented Market Economy which is a model that has no existence in the world so far. Vietnam has been seeking its own way on the road of development and protection of the country. Hence Vietnam has a lot of things to do in the process of global economy integration. Vietnam also became a member of World Trade Organization in 2006 and it needs time to change its existing legal system and business environment. These changes will create an equal and fair business environment for every enterprise including all businesses in all economic sectors.

Recommendations

Today although EPC Contracts are popularly used for medium and large projects in infrastructure and in oil and gas sector, but the success of applying the form of EPC Contracts are still dependant on both jurisdictions and practices where they are used for. In countries where jurisdictions are very stable and stringent, the application of EPC Contracts is very easier and more advantageous than that in countries where jurisdictions and legal systems are less stable and tight.

Based on the case study and analysis, the following recommendations can be made:

For the project company, PVGC:
- PVGC must have a program summarizing all projects have been done and analyzing adverse factors in order to prevent similar situations occurred in future projects.
- PVGC should make a proposal submitted to PVN and EVN to ask them speed up their gas customers to catch up the construction schedules planned during GDC construction period.
- PVGC should set up a risk management program for each project from the beginning to completion of the project.
- In order to minimizing any loss which may be incurred in the future projects when having a participation of any foreign company as stakeholder, PVGC should have more close relationship with its customers and have some agreement like off-take agreement.

For the EPC Contractor, DWE:

Because the DWE was the foreign EPC Contractor, therefore the EPC Contractor had to scrutinize the local legal system, practices and the economic mechanism in order to evaluate and foresee any situation he may face with in the construction period. The following issues needed to be taken before signing the EPC contract or sometimes are called contract signing checklist.

1. Review your Bid: DWE should review its Bid carefully before starting the signing of EPC contract.
2. Review complete plan: Before signing EPC contract; DWE should review all plans including sub-contractor’s plan, and the plans of other parties involved in the project.
3. Another aspect the EPC Contractor should study laws, regulations and other statutory documents that may affect the EPC Contractor during its execution of EPC Contract.

Abstract

Engineering, Procurement and Construction (EPC) Contract is widely used today in the world in general and in Vietnam in particular. Especially in oil and gas industry EPC contract is getting more and more popular and is often involved in medium and large scale oil & gas projects. According to an EPC Contract a contractor has obligation to hand over a complete facility or complex to a Owner (or client) who needs 'turn a key' to begin operating the facility, therefore EPC Contract is now and then called “turnkey contract. Besides delivering a complete facility or complex, the contractor shall deliver that facility or the complex at a guaranteed price until a guaranteed date and he has to undertake the construction work to satisfy designated specifications, requirements or to the specified level. Any failure of his obligations to comply with any specifications or requirements will often bring the contractor to bear monetary loss and liability.

Vietnam Oil & Gas Group had an early stage to get an application of EPC Contract forms in 1990s when Vietnam had suffered the United States of America’s economic trade embargo against all of its social and economic aspects. All EPC contracts that were used in oil and gas projects in Vietnam at that time always had foreign participations or involvement on those projects and most EPC contractors who undertook the projects were foreigners. After United States of America lifting its economic and trade embargo against Vietnam to date, the use of EPC contracts has been spreading to various industries and sectors, especially for ODA (Official Development Assistance) projects such as infrastructure projects where capital had been funded by foreign countries, regional and international financial institutions. The uses of EPC contracts are very common in energy projects like power generation plants in recent years in Vietnam.

However, there is still debate on the use of EPC contracts in Vietnam, because of Vietnam’s legal system, practices in construction industry and other matters.

This study will only be focusing on the use of one of EPC Contracts in the oil and gas sector in Vietnam – Phu My Gas Distribution Center (hereinafter referred to as GDC) and state the advantages, disadvantages and problems of EPC contracts applicable in oil & gas projects in Vietnam. How to resolve the problems in exercising EPC contracts and measures to be taken to prevent the problems will also be raised in this study.

Tuesday 8 October 2013

Safety and Quality Management for Construction of Temporary Structures with Reference to Construction Regulations and Contracts in Vietnam

The fatal accidents happen everywhere. These accidents not only influence the workers and projects but also have direct effect on money and time. It normally takes much money to compensate the loss of workers and to repair the damages of the project and many other expenses. Besides, it consumes much time during accident investigation, designing, repairing and sometime for legal questions.  

Some people think that accidents are unavoidable. Hoang Don Dung made a study to improve and analyze every aspect of the problem in detail and propose recommendation. The objectives of his research were to:

1. analyze the reasons of the recent construction accidents in Vietnam which are related with the quality of temporary structure.

2. apply the regulation of Vietnam government and FIDIC contract to study these accidents.

3. give out some recommendations to improve the safety and quality of temporary support structure in construction process.

Conclusion

Studying occupational accidents happened in the past. We can recognize that there were two kinds of them: predictable or unpredictable. But the damages of these accidents were taken by human. A predictable occupational accident means avoidable if we do the right work. Most accidents of temporary construction structure in the past are predictable and avoidable but they have happened because the behavior of construction employees is subjective.

Many people at site often think that every temporary structure is just serving for executing a super-structure, it is not worth for long time. The executing weight loading on temporary structure is short-term load, too. The owners or customers won’t check it closely and in detail like other parts of project. In fact, some kinds of loading capacity may load on super-structure but not on temporary structure such as loads defined by probability, loads following seasons, earthquake, etc. This makes ideas of disregarding the temporary structure systems.

In many projects, temporary structures have not been considered as superstructure in processes of designing and executing.

That means before implementing the temporary structure at site, it must be designed in detail attending the applied standard and codes. The design drawings and specification must be verified and accepted carefully by the Engineer/Supervisor as defined by Fidic terms or Vietnam Decree 209 to the superstructure.

Before implementing the temporary structure at site, its materials must be tested based on the applied standard and codes. Contractor may use old material but loading capacity must be ensured. Besides, using materials for the temporary structure must obey specification.
Contractor’s technical staff and owner’s supervisor must supervise and accept temporary structures carefully to achieve technical requirements defined by approved design and specification.

Recommendation

To solve the problems, the support of authority is indispensable. Government policies should have to regulate besides the regulations that were defined in Decree 209 (or the Fidic conditions of contract if applied) as follows:

a. Every temporary structure must be behaved as superstructure in designing and executing process.
b. Contractor’s employees have to be trained appropriately. They have to have proper profession certificates.

Abstract

Years by years, the persons who do their routine work at construction site still try to devote themselves to their jobs. Now and then there is information of a construction accident happened somewhere, they hear information and feel sorry for their coworkers. Then they can forget it at once because they think simply that accident was not their case; it does not relate to them.

Is that true? Don’t they relate completely and absolutely to any occupational accident though it happens out of their construction site? The answer is no because each of them is playing a roll in construction sector. Each person has his obligation of occupation. Somehow, by his opinions or activities he can help either to prevent accidents or reduce damage. He may not keep it for himself. Therefore those opinions must be written down.

This report writes about occupational accidents happened in Vietnam construction site in several recent years. The accidents happened by poor-quality and un-safety of the different temporary structure systems at the different site but basically the causation is human. They did not put all their consideration to the temporary structure because it’s non-permanent. In fact, they did design, manage, execute and check the temporary structure carelessly. 


The author hopes that this report will give a more opinion to persons who do their routine work at construction site related to temporary structure systems. They will play very well their rolls at site as defined by government regulations and/or terms of Fidic contract.

Monday 7 October 2013

Contract Management How Owners Can Be Responsible For Changing Orders in Oil and Gas Project Management

Vietnam oil and gas industry ranks fourth in oil production in Southeast Asian countries. To develop the gas market, petroleum refining, petrochemical, petroleum trading and distribution, expansion and development of petroleum services to build an integrated petroleum industry, the total investment needs for the petroleum sector are projected at US$ 30 billion within 2006-2025 periods in which the investment from partners is about US$ 14 billion. (Source: Vietnam National Oil and Gas Group, “PETROVIETNAMs development strategy to 2015 and orientation toward 2025”). It means that many contracts will be signed in the future to realize the strategy.

However, during the implementation of the oil and gas construction contracts, many requests for change order from the contractor have been sent to the owner but many owners never respond in time. Sometimes it cause project delay because contractor spends extra time in waiting for the owner’s approval change order and the contractor claims for money or extends the time of the project.

Due to these cases, many oil and gas projects overrun cost or cause delay, so how could Owner manage change order request in time to reduce extra expenses and the project could finish on time. Do Van Hanh made a study which main objectives are:

1. How owner could minimize change order in pre-contract phase.
2. How owner could respond to manage change order during construction phase
3. Analyze the practice of change order through a case study of offshore oil and gas construction project.

Conclusion

All construction projects, even the best planned projects experience change, and there will be cost impacts and disruptions associated with implementing the change. The Author realizes some keys to managing the change such as:
1. to be knowledgeable about pricing change orders and understand the potential for changes to have additional impacts beyond the direct cost of the change;
2. Owner should prepare a contract form with adequate clear clauses and terms that prescribe that contractors have to respond to engineering, procurement, construction and install, and time limit for each parties to respond when a change order happens;
3. owner and contractor should set up a good communication;
4. both owner and contractor should assign contract management and contract administration to a well-experienced person;
5. Owner should hire a well-experienced and professional consultant company to manage the project.
a.) By understanding and including these costs in early change order pricing, both the owner and contractor can have impacts associated with changes and can limit conflict and claims later in the project. Furthermore, by understanding and implementing these change management steps, the changes of the parties resolving the outstanding change orders more effectively and efficiently during the construction process greatly increase.
b.) If Owner prepares a good contract form with adequate clear clauses, term, standard, norm and criterion that prescribe clear responsibility, authority of each party, it will be easier to have an agreement during negotiation.
c.) Communication is very important help to solve the problems; it helps owner and contractor to understand each other. If Owner and contractor have a good communication, both parties will easy to have an agreement.
d.) If the owner assigns the contract management to an experience administrator, he or she is knowledgeable in terms, clauses, and how to solve each kind of situation.
e.) A good consultant will help the owner to collect information, keys finding and give a good advice to solve the problems.

Abstracts

Viet Nam is a developing country needs to develop projects to build infrastructure, investment production base is a huge. However, the new approach and experience should not have management contracts particularly weak resolving issues, related to treatment change order. Many owners do not have the experience or the responsible handling of problems arising inappropriately caused the projects’ capital increase, and project delay.

In this report, the author wants to highlight the theoretical overview to investors arising manage and resolve them effectively. Also make some recommendations to reduce the risks of change order due to the project caused.

Furthermore, the authors also offer a case study and analysis baked each issue during project implementation, thereby giving recommendations as well as the lessons and conclusions for management change orders of investors.




Thursday 3 October 2013

Factors Influencing Benefits of Projects

Most construction projects begin with recognition of a need for a new facility. Long before designers start preparing drawings and certainly well before field construction can commence, considerable thought must go into broad-scale planning. Elements of this phase include conceptual analyses, technical and economic feasibility studies, and environmental impact report.

-  Select location and content requirements of the Project Owner
-  Market Research Project
-  Solutions of design
-  The related costs

His thesis deeply analyzed how the plans of design influence to efficiency of the project and make appropriate recommendations, and adjustments to ensure the economics of the project. The purpose of the research is to systematize the implement of setting up the investment projects started from the selection of location, market research, solution design and construction measures for the purpose of ensuring economic efficiency project.

Conclusion

Based on the market studies of this project, requirements of investors as well as the solution design, the difficulties and advantages of the project are evaluated as follows:

Difficulties:
-   The efficiency of hotel investment project is low.
The Scale of works is large and complex, so process requires well-organized of security, sanitation, management.
Features links between building blocks reduce privacy and about the process for green to win.
The costs of maintaining the fitness center, swimming pool and sauna will be very high: Costs of swimming pool maintenance, costs of sanitary pipe, personnel costs of continuous inspection and maintenance of sanitation in areas.

Advantages:
Characteristics of the population: there is area of developed community, higher living conditions.
Large scale projects will help to achieve a better deal and reduce maintenance costs per unit area.
The ability to combine and save costs if we use and share the system control, security, administration ... between the works together.
To ensure the economic efficiency of the project, we should focus on two main issues as follows:

1.         Development orientation of the project:
It is necessary to have a scientific and long-term orientation for the entire project in accordance with the assessment, analysis of market demand to avoid given the subjective, impulsive orientation.
This project only made the security design and costing investment but not to set up the business plan and for the restore process. This is very important and must have been studied from the beginning to achieve synchronism for project.

2.         Research the safety design

  The Underground:
Redistribute the land boundary between the office block, apartment, hotel (from basement to ground floor) and determine the use of each function areas.
Review technical planning area, M & E.
Divide the number of parking spaces to fit over the block.

  The Hotel:
Change of use from hotels to apartments to suit the needs of the market.

  The Office:
Necessary to determine a standard office class A or B in order to have adequate choice in types of materials complete
Adjust the design to increase the use of performance floor – Office area with the aim of achieving the efficiency 85%.

  The Apartment:
Adjust the design to increase the use of performance floor - Apartments aiming to achieve the efficiency 85%.
Adjust the structure, proportion and number of apartments to suit the market demand. Specifically reduce the number of large apartments, increase the number of apartments under 120m2 to suit the large segment of the market.
Decrease the investment rate to reduce the price, which increase the liquidity to meet the needs and generate greater attention for the product of apartment projects

Abstract

The major task in Hanoi’s plan is concentrated to the investment, construction and development of the Capital to be a civilized urban, including basic completion of ring roads No.3, three big bridges crossing Red river, construction of some urban railways, continuous development of new and modern urban areas to the South, investment of new urban areas on the West Lake and improvement of old apartment buildings. Furthermore, the construction of new urban areas on the North of Red river, development of water drainage plan, phase II shall also be taken into account. Five concentrated urban sewage treatment plants shall also be constructed and set into operation.

Beside above-mentioned important projects, Hanoi shall also concentrate on developing the service branches and fields as: tourism, trading, finance, banking, science and technology, public health, education and training, public transport and consulting services.

Developing solution: preparing to implement the service commitments within framework of ASEAN - WTO; constructing the development project of 4 types of markets including: capital market, stock market, real estate market, science and technology market and labor market; constructing cooperation  mechanism between Hanoi and central, provincial organs and cities in the whole countries; to provide favorable conditions in terms of administrative procedures, investment policies for enterprise to develop their services.

The city is calling the foreign investment to high quality services, to meet more than FDI-funded 30% capital; to utilize efficiently the investment, trading and tourism promotion activities through great International events which are organized in the capital and cooperation programs of Hanoi with big cities in the world to extend the high quality service market and transfer of technology and human resource training.

The City is implementing the support policy, cost cutting, enhancement of competitive capacity of businesses; to help the businesses to construct, develop and broadcast the trademark; to encourage and honor the enterprises with effect business. The periodical dialogue between City and enterprise leaders shall be committed to annually organize to solve the difficulties in investment, to meet the development requirement of the Capital.

Some major development criteria to 2010:
+ Annual average GDP growth speeds from 2006-2010: reaching 11-12%.
+ The export turnover growth speed: from 15-17%/year.
+ Social investment growth: 17-20%/year.
+ Telephone density: 85-95 telephone/100 people.
+ Scale of population: from 3.6 million to 3.7 million people.
+ The rate of pour decrease to below 1%.
+ Averagely urban residence 9-10m2/person.
+ Urban fresh water supply 140-160 liter/person/day-night.
+ Public transport meeting 30-35% people’s demand.

Hanoi is proud to be a wealthy economy, with young & active human resources having great aspiration of their city and country, as well as an environment with more and more increasing encouragement policy though it is still on development.

In the stable economics and consumption development, the need on properties is more and more increasing with remarkable speed. Due to the increasing income, the demands on better accommodation, commodities and recreation goods also increase. The interest of foreign foreign enterprises in making business in Vietnam also more and more increases, especially when Vietnam has become a WTO member. As a result, it leads to the urgent and great demand on high-quality Office, Residence and Hotel.

Therefore, the development of high-grade International-standard senior Hotel, Office and Apartment in Hanoi is very essential and with economic efficiency. By this way, it contributes to bring the comfort to foreign investors to Vietnam, meeting the necessary demand to social life. Concurrently, project also contributes to develop the Vietnam tourism, enhances the cultural exchange between Vietnam and Countries all over the world, as Vietnamese Government’s opinion, to widen both domestic and foreign exchanging and cooperation relationship. Moreover, the participation of foreign enterprises in general and project in particular will contribute an income to State budget and provide work opportunity for Vietnamese labors, and indirect contribution to social stabilization.
This thesis will address the limited factors affecting the economic efficiency in the work of the project feasibility study and proposals, solutions to ensure effective project.